Siemens WS-AP3610 / WS-AP3620
- Hardware Highlights
- Installation
- Hardware
  - Info
  - Photos
  - Opening the case
  - Serial
  - JTAG
- Bootloader mods
- Hardware mods
- Bootlogs
  - OEM bootlog
  - OpenWrt bootlog
- Notes
- Tags

Siemens WS-AP3610 / WS-AP3620

A solid dual-band AP from 2008 with 716 Mhz Single Core CPU, 16 MB Flash and 128 MB RAM. 48V PoE (active, 802.3af), 2x gigabit ethernet ports. AP3610 has integrated antennas, AP3620 has three detachable dual-band antennas. Typical power consumption: 11 watts.

Hardware Highlights

SoC:  Atheros AR7161
RAM:  Samsung K4H511638D-UCCC
      2x 64M DDR1
SPI:  Micron M25P128 (16M)
WiFi: Atheros AR9160 bgn
      Atheros AR9160 an
ETH:  Broadcom BCM5481
LED:  Power (Green/Red)
      ETH (Green / Blue / Yellow)
          (PHY-controlled)
      WiFi 5 (Green / Blue)
      WiFi 2 (Green / Blue)
BTN:  Reset

Serial: Cisco-Style RJ45 - 115200 8N1

Installation

quoted from David Bauer, ?p=openwrt/openwrt.git;a=commit;h=d2b8ccb1c04def81224da6f42f644c7d239b9986

1. Download the OpenWrt initramfs-image. Place it into a TFTP server
   root directory and rename it to 1401A8C0.img. Configure the TFTP
   server to listen at 192.168.1.66/24.

2. Connect the TFTP server to the access point.

3. Connect to the serial console of the access point. Attach power and
   interrupt the boot procedure when prompted (bootdelay is 1 second).

4. Configure the U-Boot environment for booting OpenWrt from Ram and
   flash:

   $ setenv boot_openwrt 'setenv bootargs; bootm 0xbf080000'
   $ setenv ramboot_openwrt 'setenv serverip 192.168.1.66;
     tftpboot; bootm'
   $ saveenv

5. Load OpenWrt into memory:

   $ run ramboot_openwrt

   Wait for the image to boot.

6. Transfer the OpenWrt sysupgrade image to the device. Write the image
   to flash using sysupgrade:

   $ sysupgrade -n /path/to/openwrt-sysuograde.bin

Hardware

Info

This table is automatically generated, once the correct filters for Brand and Model are set.
If you see “Nothing.” instead of a table, please edit this section and adjust the filters with the proper Brand and Model. Just try, it's easy.
If you still don't see a table here, or a table filled with '¿': Is there already a Techdata page available for Siemens WS-AP3610 / WS-AP3620 ? If not: Create one.
If you see a table with the desired device data, everything is OK and you can delete this text and the <WRAP> that encloses it.
If it still doesn't work: Don't panic, calm down, take a deep breath and contact a wiki admin (tmomas) for help.

Photos

Siemens HiPath WS-AP3620:

Opening the case

a long, thin security Torx (with center pin) is needed

Serial

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

Replace EXAMPLE by real values.

Serial connection parameters for Siemens WS-AP3610 / WS-AP3620 @@Version@@	EXAMPLE 115200, 8N1, 3.3V

JTAG

→ port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootloader mods

→ bootloader

Hardware mods

None so far.

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE

OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING

Notes

Space for additional notes, links to forum threads or other resources.

Table of Contents